Table of Contents
Advertisement
Use
Starting a program
^ Press the "Start" button.
The program begins and the "Start"
indicator lights.
Cancel a program only in the first
few minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
34
Time display
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time is shown in the display.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
The current time of day, the remaining
and end time of the program can be
displayed during the running program.
^ Press the d button.
^ To change back to the main menu
press d again.
Hide quick links:
Advertisement
Table of Contents
