Cleaning And Storage; Troubleshooting Chart - Craftsman INCREDI-PULL 316.794831 Operator's Manual

MAINTENANCE INSTRUCTIONS
CLEANING
Use a small brush to clean off the outside of the unit. Do not use strong
detergents. Household cleaners that contain aromatic oils such as pine
and lemon, and solvents such as kerosene, can damage plastic housing or
handle. Wipe off any moisture with a soft cloth.
STORAGE
Never store the unit with fuel in the tank where fumes may reach an open
•
fl ame or spark.
Allow the engine to cool before storing.
•
Lock up the unit to prevent unauthorized use or damage.
•
Store the unit in a dry, well-ventilated are a.
•
Store the unit out of the reach of children.
•
LONG TERM STORAGE
1. Drain all gasoline from the gas tank into a container. Do not use gas that
has been stored for more than 30 days. Dispose of the old gasoline in
accordance to Federal, State, and Local regulations.
2. Start the engine and allow it to run until it stalls. This ensures that all
gasoline has been drained from the carburetor.
ENGINE WILL NOT START, IDLE OR ACCELERATE
Empty fuel tank
Primer bulb wasn't pressed enough
Old fuel
Fouled spark plug
Air fi lter is plugged
Improper idle speed
ENGINE LACKS POWER OR STALLS
Old fuel
Fouled spark plug
NEED MORE HELP?
You'll fi nd the answer and more on managemylife.com – for free!
Find this and all your other product manuals online.
■
Get answers from our team of home experts.
■
Get a personalized maintenance plan for your home.
■
Find information and tools to help with home projects.
■
8
TROUBLESHOOTING
PROBLEM
MAINTENANCE INSTRUCTIONS
3. Allow the engine to cool. Remove the spark plug and put 5 drops of high
quality motor oil into the cylinder. Pull the starter rope slowly to distribute
the oil. Reinstall the spark plug.
NOTE: Remove the spark plug and drain all of the oil from the cylinder
before attempting to start the blower after storage.
4. Change the oil, referring to Changing the Oil. Dispose of the old oil in
accordance to Federal, State and Local regulations.
5. Thoroughly clean the unit and inspect for any loose or damaged parts.
Repair or replace damaged parts and tighten loose screws, nuts or bolts.
The unit is ready for storage.
TRANSPORTING
Allow the engine to cool before transporting.
•
Secure the unit while transporting.
•
Drain the gas tank before transporting.
•
Tighten gas cap before transporting.
•
Fill fuel tank with fuel
Slowly press primer bulb 10 times
Drain gas tank and add fresh fuel
Replace or clean the spark plug
Replace or clean the air fi lter
Adjust according to the Idle Speed Adjustments section.
Drain gas tank and add fresh fuel
Replace or clean the spark plug
brought to you by Sears
SOLUTION