Figure 3-2 Panel Cutout - Siemens SINUMERIK ONE Equipment Manual
Hide thumbs
Also See for SINUMERIK ONE:
- Commissioning manual (736 pages) ,
- Operating and programming manual (312 pages) ,
- User manual (300 pages)
Table of Contents
Advertisement
Dimension drawings
Panel cutout
The MCP 2400.9c is secured using 14 M5 nuts. The tightening torque is 1.5 Nm. In addition to
the M5 nuts, use the spring elements provided. Customers are responsible for the geometry of
the panel cutout, as well as fastening the MCP in the housing. To mechanically protect the outer
edge of the front panel, the device must be installed so that it is recessed by at least 0.5 mm with
respect to the surrounding housing.
①
All corner radii R5 or 5x45° chamfer
Figure 3-2
Panel cutout
16
ONE MCP Part 2: MCP 2400.9c
Equipment Manual, 09/2022, A5E52294261B AA
Advertisement
Table of Contents
