Figure 6-9: System Interface; Figure 6-10: Switch To Bypass Interface - Eaton 93PR Series Installation And Operation Manual

On the system control interface, you can switch to bypass mode, start up the system, shut down
the system, enable ESS, or disable ESS disable. When the button is gray, it indicates that this
button is currently null. On the top of the interface, you can view the UPS status and battery
status.
Method for switching the system to bypass mode:
When the "Enter Bypass Mode" button is not in gray, you can switch to bypass.
• Click "Enter Bypass Mode" button to switch to the bypass interface, as shown in
• Click "Switch to Bypass" button on this interface, as shown in
• Click "OK" button to switch to the bypass mode, as shown in
other button functions.
53

Figure 6-9: System interface

Figure 6-10: Switch to bypass interface

Figure 6-10
.
Figure 6-10 . It is the same for
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Figure 6-9
.