Table of Contents
Advertisement
Operation
1. Plug the supplied cable into
display unit and rear of scale.
2. Put the scale on a flat level surface
before weighing any items.
3. Press the POWER button once.
When "0" appears on the display,
the Scale is ready for weighing.
4. If the number shown is not
"0" before weighing, press
TARE button to reset to "0".
NOTE: The default unit is lb./oz.
5. Press MODE
to select the measuring unit.
Hold Button
1. Press HOLD button to lock
the weight. The LED will show
"hold" in the upper left corner.
Tare Button
1. To weigh item in a container,
place container on Scale
and press TARE button.
Item 59492
For technical questions, please call 1-888-866-5797.
NOTE: The scale will automatically
switch to kg when the weight
is larger than 1000g.
6. Gently place item to be weighed
in the middle of platform. The
weight will appear on the display.
NOTE: "ERR" will appear on
display if scale is overloaded and
will power off after 10 seconds.
NOTE: Units are automatically
saved after powering off.
2. Press HOLD again to unlock
or it will automatically unlock
after 60 seconds.
3. To turn off Scale, press POWER
button. If using batteries, the scale
will turn off in 90 seconds
if there is no operation.
2. Add item to container.
Page 5
Advertisement
Table of Contents
