Installing/Replacing Batteries; Using Batteries - CEN-TECH 59492 Owner's Manual

Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this document including all text under
subheadings therein before set up or use of
this product.

Installing/Replacing Batteries

1. Remove battery compartment
cover from digital display unit.
Using Adapter
1. Connect the cord to the
display unit and the scale.
2. Connect the USB-C power
cable to the display unit and
to the receptacle located at
the rear of the Scale.

Using Batteries

1. Connect the cord to the
display unit and the scale.
Page 4
For technical questions, please call 1-888-866-5797.
2. Insert batteries into battery
compartment. Position
batteries in proper polarity.
3. Replace battery
compartment cover.
3. Plug the Adapter into
120VAC grounded outlet.
Item 59492