Omron NJ Series User Manual page 451

Name
tcpCurrEstab
tcpInSegs
tcpOutSegs
tcpRetransSegs
tcpConnTable
tcpConnEntry
tcpConnState
tcpConnLoca-
lAddress
tcpConnLocal-
Port
tcpConnRe-
mAddress
tcpConnRem-
Port
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Standard [(identifier) attribute]
[(9) RO]
The total number of TCP connections cur-
rently in the ESTABLISHED or the CLOSE-
WAIT state.
[(10) RO]
The total number of received segments. This
includes the number of error segments.
[(11) RO]
The total number of sent segments. This in-
cludes the number of segments for the cur-
rent connection, but does not include the
number of segments for resent data only.
[(12) RO]
The total number of resent segments.
[(13) NA]
The information table specific to the TCP
connection.
[(1) NA]
Entry information related to a specific TCP
connection. This value is deleted if the con-
nection changes to the CLOSE state. The in-
dices are tcpConnLocalAddress,
tcpConnLocalPort, tcpConnRemAddress,
and tcpConnRemPort.
[(1) RW]
The status of the TCP connection.
closed (1)
listen (2)
synSent (3)
synReceived (4)
established (5)
finWait1 (6)
finWait2 (7)
closeWait (8)
lastAck (9)
closing (10)
timeWait (11)
[(2) RO]
The local IP address of this TCP connection.
A value of 0.0.0.0 is used for connections in
the LISTEN state that accept connections
from any IP interface related to the node.
[(3) RO]
The local port number for this TCP connec-
tion.
[(4) RO]
The remote IP address for this TCP connec-
tion.
[(5) RO]
The remote port number for this TCP connec-
tion.
14 SNMP Agent
Implementation spec-
Support
ifications
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ard.
ed
--- ---
--- ---
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
14
14-17