Dtmf Ani; Squelch And Other Menu Functions - Midland 100-Watt UHF User Manual

Titan™ Mobile User's Guide
Press and release the A/D button to enter scan add/delete mode.
The A/D icon (AX2 on standard head) will be displayed while
scan add/delete mode is active. Once you are in add/delete
mode, use the channel knob to scroll through the channels. To
add a channel to the scan list, or remove a channel that is
already in the list, press and release the scan button. The PRI or
SCAN icon will toggle on/off indicating scan list status. Press and
release the A/D button again to exit add/delete mode.

DTMF ANI

The Titan mobile radio may be programmed to automatically
send a DTMF ANI signal when you press PTT on certain
channels. Or, if ANI has been configured by programming, but
not enabled for the channel, you can use the menu function to
temporarily enable ANI.
A thirty second release timer will be started each time you release PTT.
The ANI will not be sent unless this timer has expired.

Squelch and Other Menu Functions

Several parameters may be changed using the menu functions.
Menu selections (press menu)
1.
Press the channel/menu knob to select the first menu item, squelch level,
SQL.
2.
Rotate the channel/menu knob to change the squelch level. The squelch
adjustment range is 0 – 80, where 80 is the least sensitive or tight squelch
position. Adjust squelch at least five steps above threshold (after BUSY icon
extinguishes) for best operation.
© 2005, Midland Radio Corporation
Squelch S(QL) 0-80
Group GRP (name)
Group scan OGS, AGS
User scan PRI, SCN, P/S
Backlight BL (O)N, (OF)F
ANI AN(I) (O)N, (OF)F
21