Table of Contents
Advertisement
Enter the Setting mode to set your player's system options.
To enter Setting mode, select and confirm SETTING in the Main menu.
Upon entering Setting mode, you will have the following options: Sound, Display, General, Time,
Rec Quality and Information.
Press UP/DOWN to select a setting and press
menu.
Sound
Select and confirm SOUND in the setting menu to set options relating to the way audio is pro-
cessed by your player. The sound options are: EQ, User, Balance and Beep.
EQ(Equalizer)
Set a digital equalizer preset. The options are: Normal, Rock, Jazz, Classic, Pop and User.
User
Set your customer, user-defined equalizer setting.
1.
Press LEFT or RIGHT to select a band to adjust. Select the bands to the left to adjust low
(bass) frequencies; select the bands in the middle to adjust mid-frequencies and select the
bands to the right to adjust high frequencies (treble).
2.
Press UP to raise the selected band level; press DOWN to lower the selected band level.
3.
Press
when you are finished to save.
Once this has been set up, you can access this digital equalizer preset through the equal-
izer menu (please refer to SETTING > SOUND or MUSIC > Smart Menu > EQ section for
details).
Balance
Set the left-channel and right-channel levels.
1.
Press LEFT to increase the left-channel level(Left); press RIGHT to increase the right-chan-
nel level(Right). The center-position (Middle) will result a balanced left/right stereo mix.
2.
Press
when you are finished to save.
Beep
Set the beep-tone On or Off when you press a key.
1.
Press UP or DOWN to select On or Off.
2.
Press
when you are finished to save.
Display
Select and confirm DISPLAY in the setting menu to set options relating to your player's display.
The Display options are: Backlight, Brightness, Language and Lyric.
Page
SETTING MODE
to confirm. Press LEFT to back to the previous
Coby Electronics Corporation
Advertisement
Table of Contents
