Table of Contents
Advertisement
Supplying phantom power (+48 V) to the MIC connector
Long-press both the MIC EFFECTS [ON] and MIC EFFECTS [SELECT] buttons at the same time to switch phantom power
on/off.
When you press the buttons at the same time, the MIC EFFECTS 1–5 indicators all light up or go dark, and the current
phantom power setting is indicated.
MIC EFFECTS 1–5 indicators
Make sure that phantom power is turned off when you connect a dynamic mic. Dynamic mics may malfunction when
supplied with phantom power.
2.
MIC EFFECTS [SELECT] button
This recalls a mic effect preset. Each press of the button cycles between settings 1 through 5 in order.
About the presets
You can customize the mic effect settings and overwrite the presets when using the BRIDGE CAST app.
â
Saving the Mic Effect Settings as a Preset(P.34)
3.
MIC EFFECTS 1–5 indicators
The preset number of the currently selected mic effect lights up.
4.
[PITCH] knob
Edits the voice changer pitch (how high or low your voice sounds).
â
BRIDGE CAST app:
Changing the audio (Voice
5.
[FORMANT] knob
Edits the voice changer formant (the character of your voice).
â
BRIDGE CAST app:
EQ area
Use the equalizer to adjust the game sound that's input from the USB port (input source: GAME
*1: The equalizer is only applied to the game sound that's sent to the PERSONAL MIX bus. When the connection setting for the USB
port is "CONSOLE/MOBILE", the input source is "USB".
6.
EQ [SELECT] button
Recalls the equalizer presets. Each press of the button cycles between settings 1–5 and OFF in order.
About the presets
You can customize the equalizer settings and overwrite the presets when using the BRIDGE CAST app.
â
Saving the Equalizer Settings as a Preset(P.42)
7.
EQ 1–5 indicators
The preset number of the currently selected equalizer lights up.
Mixer area
Use this area to adjust the input sources assigned channels 1–4, and the respective output volumes.
The input/output settings are configured for each bus (STREAM MIX, PERSONAL MIX).
About the buses
"Buses" refer to the destinations where the audio for each input source is sent.
There are two kinds of buses on this unit, the "STREAM MIX" bus and the "PERSONAL MIX" bus. The STREAM MIX bus can be used
for streaming settings, whereas the PERSONAL MIX bus can be used for monitoring settings. Configure each bus according to
your needs.
The audio sent to the buses is output as a mix.
* The mic audio can be output without going through a bus (meaning that the mic audio is not mixed with other audio). The
mic audio can be used for voice chats.
All unlit
All lit
Changer)(P.32)
Changing the audio (Voice
Changer)(P.32)
Panel Descriptions (on BRIDGE CAST)
Phantom power
Off
On
*1
).
5
Advertisement
Table of Contents
