Installing The Bridge Cast App And Driver - Roland BRIDGE CAST Owner's Manual

Installing the Dedicated App and Driver

Installing the BRIDGE CAST App and Driver

To operate this unit and configure its settings, install the "BRIDGE CAST" dedicated app on your computer.
A dedicated driver must be installed to connect this unit to a computer and to handle multiple audio sources.
USB connection setting switch
PC
CONSOLE/MOBILE
â
Windows users
â
Mac users
ÃWindows users
Downloading and installing the dedicated app and driver
1. Set the USB connection setting switch on this unit to "PC".
2. After booting up your computer, connect this unit to the computer with the included USB cable (Type-C
to Type-C, or Type-C to Type-A).
This unit automatically turns on, and the indicators on the operating panel light up.
The dedicated driver is then downloaded automatically via the Internet, which completes the installation.
Downloading the BRIDGE CAST app
1. Launch your browser and access the following website.
https://roland.cm/bridgecast
2. From the downloads page, search for "BRIDGE CAST APP Ver.xxx for Windows" and click on the link.
"xxx" indicates the version number.
3. Follow the onscreen instructions to download the BRIDGE CAST app.
Installing the BRIDGE CAST app
1. Right-click on the compressed file that was downloaded, and select "Extract All".
2. Open the decompressed folder and double-click on the "Roland_BRIDGE_CAST_Installer.exe" installer.
3. Follow the onscreen instructions to install the BRIDGE CAST app.
If you see a User Account Control confirmation message, click "Yes".
10
Driver
Dedicated driver
Standard OS driver
USB input/output
Audio: 4 in/3 out, MIDI
Audio: 1 in/1 out