Adjusting The Mic Audio; Getting Ready To Use A Mic - Roland BRIDGE CAST Owner's Manual

Adjusting the Mic Audio

Adjusting the Mic Audio
This section explains how to adjust the mic audio.
â
Getting Ready to Use a Mic(P.28)
â
Calibrating the Mic Sound Quality (Cleanup)(P.30)
â
Processing the Mic Audio (Mic Effects)(P.32)
â
Saving the Mic Effect Settings as a Preset(P.34)
â
Saving the Mic Effect Settings as a Preset(P.34)

Getting Ready to Use a Mic

Here's how to set the type of mic used and the mic input gain (sensitivity).
â
Selecting the type of mic to use
â
Adjusting the input gain (sensitivity)
Selecting the type of mic to use
1. On the menu screen, click the "MIC SETUP" tab and set the "MIC TYPE".
Menu Value
Select a mic type according to the mic you're using.
DYNAMIC
MIC
CONDENSER
TYPE
(+48V)
HEADSET
28
Dynamic microphone
Condenser mic
* If you select "CONDENSER(+48V)", phantom power is supplied from the MIC jack.
* Don't use the "CONDENSER(+48V)" setting if you are using a dynamic mic. Dynamic mics may
malfunction when supplied with phantom power.
Headset
Explanation