Install - AT&T CL84115 Quick Start Manual

Install

Telephone base
Plug one end of the
telephone line cord
into a telephone
jack or a DSL filter.
If you have DSL
high-speed Internet
service, a DSL filter
(not included) is
required.
Plug the other end
of the telephone
line cord into the
telephone jack on
the back of the
telephone base.
Charger
Caution: Use only the power adapter(s) provided with this product. To obtain a
replacement, visit our website at
https://telephones.att.com
1 (866) 288-4268
Telephone
line cord
Plug the other end of
the coiled handset cord
into the jack on the back
of the telephone base.
Plug the power adapter into a power
outlet not controlled by a wall switch.
or call
.
5
Plug the large end of
the telephone base
power adapter into
a power outlet not
controlled by a wall
switch.
Route the cords
through the channels.
Plug the small end of the
telephone base power
adapter into the power
adapter jack on the back
of the telephone base.
One end of the coiled
telephone line cord has
already been plugged
into the handset. Make
sure it is plugged in
firmly.
1 (800) 222-3111
Route the
handset cord
through its
channel.
. In Canada, dial