Hardware Conversion - Omron NY Series Manual

5 Conversion Procedures
5-1

Hardware Conversion

This section covers the hardware actions that are required for the conversion from NS-series products
to NYE-series products.
In this section for some hardware changes detailed information is available.
For all information about the hardware of the Panel PC refer to NY-series NYE Industrial Panel PC
Hardware User's Manual (Cat.No. W634).
The hardware changes relevant for the conversion:
• The Panel PC has no integrated battery monitoring.
Refer to Hardware - Optional Hardware - Battery in NY-series NYE Industrial Panel PC Hardware
User's Manual (Cat.No. W634) for details.
Refer to Software - Industrial PC Support Utility - Product Information Tab in NY-series NYE Industri-
al Panel PC Hardware User's Manual (Cat.No. W634) for Battery status details.
• The Panel PC has no buzzer.
• The dimensions are different.
• For product dimensions refer to 3-2-1 Dimensions and Weight on page 3-3.
• For mounting area dimensions refer to 4-3-2 Panel Mount Procedure on page 4-5.
• The screen resolution might be different but the conversion details are in the section 5-2-5 Modify
Screen Resolution for an NS-Runtime Project on page 5-18.
• Grounding is different.
The Panel PC has a non-isolated input power supply and the 0V signal ground is directly connected
to PE.
The PE connection is mandatory, because the unit has a metal front enclosure which is at the boun-
dary of a cabinet enclosure. To protect users PE needs to be grounded.
When the ground of the power supply must be kept floating for other devices then use a separate
24V power supply.
5-2
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)