Dell PowerSwitch S5048F-ON Firmware Update page 8

r0.x.x.x.x.bin
linuxadmin@OS10:~$ sudo /mnt/onie-boot/onie/tools/bin/onie-fwpkg show
** Pending firmware update information:
No pending firmware updates present.
** Firmware update results information:
No firmware update results present.
re-x86_64-dell_<platform>_c2338-r0.x.x.x.x.bin /tools/bin/onie-fwpkg add onie-firmwa
linuxadmin@OS10:~$ sudo /mnt/onie-boot/onie/tools/bin/onie-fwpkg show
** Pending firmware update information:
Name
======================================================+=======+========+============+===
onie-firmware-x86_64-dell_<platform>_c2338-r0.x.x.x.x.bin|x.x.x.x| 0 |12822391|
2022-08-03 20:17:15
======================================================+=======+========+============+====
For more detailed information run: onie-fwpkg show-pending <update_name>
** Firmware update results information:
No firmware update results present.
te uxadmin@OS10:~$ sudo
linuxadmin@OS10:~$ sudo
linuxadmin@OS10:~$ sudo os10-image -o update
WARNING: ONIE update requested
Are you sure (y/N)? y
ERROR: [Errno 2] No such file or directory
linuxadmin@OS10:~$ sudo reboot
[ 972.804334] watchdog watchdog0: watchdog did not stop!
BIOS (Dell Inc) Boot Selector
<platform> x.x.x.x (48-port 1G/4-port SFP+ 10G)
CPLD JTAG to normal mode...
Resetting...
BIOS (Dell Inc) Boot Selector
<platform> x.x.x.x (48-port 1G/4-port SFP+ 10G)
CPLD JTAG to normal mode...
POST Configuration
CPU Signature <x>
CPU FamilyID=<x>, Model=<x>, SteppingId=<x>, Processor=<x>
Microcode Revision <x>
Platform ID: <x>
PMG_CST_CFG_CTL: <x>
BBL_CR_CTL3: <x>
Misc EN: <x>
Gen PM Con1: <x>
Therm Status: <x>
POST Control=<x>, Status=<x>
BIOS initializations...
CPLD JTAG to normal mode...
CPGC Memtest for Channel 0 .................. PASS
ECC enabled: channel 0 DECCCTRL_DUNIT_REG=0x000200F3
SATA2 tuning...
POST:
RTC Battery OK at last cold boot
RTC date MM/DD/YYYY HH:MM:SS
POST SPD test ............................... PASS
POST Lower DRAM Memory test
.... Perf cnt (curr,fixed): 0x29144E78A,0x3D9E44823
8
/mnt/onie-boot/onie/tools/bin/onie-boot-mode -q -o upda
umount /mnt/onie-boot
done.
done.
done.
done
|Version|Attempts|Size (Bytes)|Date