Dell PowerSwitch S5048F-ON Firmware Update page 13

Hide thumbs Also See for PowerSwitch S5048F-ON:
Table of Contents

Advertisement

onie-firmware-x86_64-dell_<platform>_<cpu_name>-r0.x.x.x.x.bin|x.x.x.x| 0 |12822391|
2022-08-03 23:45:45
======================================================+=======+========+============+===
For more detailed information run: onie-fwpkg show-pending <update_name>
ONIE:/mnt/onie-boot #
ONIE:/mnt/onie-boot #
ONIE:/mnt/onie-boot #
ONIE:/mnt/onie-boot # onie-fwpkg show-pending onie-firmware-x86_64-
dell_<platform>_<cpu_name>-r0.x.x.x.x.bin
** Pending firmware update information:
Name
======================================================+=======+========+============+===
onie-firmware-x86_64-dell_<platform>_<cpu_name>-r0.x.x.x.x.bin|x.x.x.x| 0 |12822391 |
2022-08-03 23:45:45
======================================================+=======+========+============+===
Additional image information:
image_version=x.x.x.x
image_vendor_id=674
image_platform=x86_64-dell_<platform>_<cpu_name>-r0
image_machine=dell_<platform>_<cpu_name>
image_machine_rev=0
image_arch=x86_64
image_config_version=1
image_build_date="2022-08-03T16:57-0700"
ONIE:/mnt/onie-boot #
ONIE:/mnt/onie-boot # onie-boot-mode -o
ONIE:/mnt/onie-boot #
ONIE: ONIE Update Mode ...
Version
: x.x.x.x
Build Date: 2022-08-03T14:39-0700
Info: Mounting kernel filesystems... done.
Info: Mounting ONIE-BOOT on /mnt/onie-boot ...
Info: Using eth0 MAC address: 74:e6:e2:f7:11:80
Info: Using eth1 MAC address: 74:e6:e2:f7:11:81
Info: eth0:
Checking link... up.
Info: Trying DHCPv4 on interface: eth0
ONIE: Using DHCPv4 addr: eth0: 10.11.227.42 / 255.255.252.0
Info: eth1:
Checking link... down.
ONIE: eth1: link down.
ONIE: Failed to configure eth1 interface
Starting: dropbear ssh daemon...random: dropbear urandom read with 38 bits of entropy
available
done.
Starting: telnetd... done.
discover: ONIE update mode detected.
Starting: discover... done.
Please press Enter to activate this console. Info: eth0:
Info: Trying DHCPv4 on interface: eth0
ONIE: Using DHCPv4 addr: eth0: 10.11.227.42 / 255.255.252.0
Info: eth1:
Checking link... down.
ONIE: eth1: link down.
ONIE: Failed to configure eth1 interface
ONIE: Starting ONIE Service Discovery
FAT-fs (sda7): Invalid FSINFO signature: 0x82564557, 0x61417272 (sector = 1)
ONIE: Executing installer: /mnt/onie-boot/onie/update/pending/onie-firmware-x86_64-
dell_<platform>_<cpu_name>-r0.x.x.x.x.bin
Verifying image checksum ... OK.
Preparing image archive ... OK.
Firmware: Version
Firmware: Architecture
Firmware: Machine
Firmware: Machine Rev
Firmware: Config Version: 1
=============== ONIE FW UPDATER ===============
In fw_install.sh
/tmp/tmp.SNt4TL/installer/firmware
-rw-r--r--
1 7758
Skipping configuration.
Skipping configuration.
: x.x.x.x
: x86_64
: dell_<platform>_<cpu_name>
: 0
3000
209 Aug 24 23:57 fw-version.make
|Version|Attempts|Size (Bytes)|Date
update
Running updater.
Checking link... up.
13

Advertisement

Table of Contents
loading

Table of Contents