Video Setup Menu - Memorex MVDP1083 User Manual

VIDEO SETUP MENU:

General Audio Dolby
General
- - Video Setup Page - -
Press the SETUP button to enter the menu, select VIDEO SETUP using the Navigation
Component
(√,®) buttons, then press the PLAY/ENTER button on the remote (ENTER button on main
TV Mode
Sharpness
unit) to select it. Select/change the setup option as described on this and the following page
Brightness
using the Navigation (√,®,π,†) buttons and the PLAY/ENTER button.
Contrast
COMPONENT
1
Component
General General Audio
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Component
LCD: Select to see the image on the built-in screen. (You
can connect to an external TV to see the image using the
Video cable.)
YUV: Select for Component (Y/P
General General Audio Dolby
Output. (You will need to connect to an external TV to see
- - Video Setup Page - -
the image using the Component cable.)
Component
NOTE: When you select YUV, the built-in screen will turn
TV Mode
Sharpness
off automatically and you can see the image on the
Brightness
external TV using the Component cable. To see the
Contrast
image on the built-in screen again, turn off the unit and
then turn on again, the Component Output will reset to
LCD.
General Audio
General
- - Video Setup Page - -
TV MODE
Sharpness
Component
The TV Mode setting is for Component Output only. Once
TV Mode
you have set Component Out to YUV, you can select the
Sharpness
Brightness
TV Mode setting:
Contrast
P-Scan: Select for Progressive Scan Component Video
Output.
Interlace: If you connect a TV (using the Component
Sharpness
Cable) that is not compatible with a progressive scan
signal, select Interlace for the Component Video Output.
BRIGHTNESS
1
General Audio
General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
General General Audio
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Brightness
Adjust to sharpen or soften the picture.
Contrast
Brightness
SETUP MENU (CONTINUED)
Video Preference
LCD
Yuv
Dolby Video Preference
LCD
Yuv
/P or Y/C
B R
Video Preference
High
Medium
Low
Dolby Video Preference
High
Medium
Low
Dolby Video Preference
Dolby Video Preference
General General Audio
Component
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
SHARPNESS
Sharpness
1
General General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Adjust for the desired sharpness (HIGH,
Sharpness
MEDIUM, LOW).
General Audio
General
/C )
- - Video Setup Page - -
B R
Component
TV Mode
Sharpness
Brightness
Contrast
Brightness
General General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Brightness
CONTRAST
1
General Audio
General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
General
General
- - Video Setup Page - -
Contrast
Adjust to increase or decrease the contrast. Component
TV Mode
Sharpness
Brightness
Contrast
23
Contrast
Dolby Video
High
Medium
Low
Audio Dolby Video
High
Medium
Low
Dolby Video
Audio Dolby Video
Dolby Video
Audio Dolby Video
Preference
Preference
Preference
Preference
Preference
Preference