Charging The Battery Pack; Using The Car Adapter - Memorex MVDP1083 User Manual

POWER SOURCES (CONTINUED)

CHARGING THE BATTERY PACK

"LOW BATTERY" will appear on the screen when the battery is low and needs
recharging. The battery can be charged while attached or not attached to the unit
as follows:
WITH THE BATTERY ATTACHED TO THE UNIT:
With the Battery Pack attached, insert the small end of the AC adapter into the DC
IN CHARGE jack on the side of the Battery Pack or the DC IN jack on the side of
the unit. Insert the other end (with the 2 blades) into a conveniently-located AC
outlet having 120V AC, 60Hz. The CHARGE indicator will light red as the battery is
charging and green when charging has completed. Disconnect the AC adapter
plugs when charging has finished.
WITH THE BATTERY NOT ATTACHED TO THE UNIT:
You can also charge the Battery Pack when it is not attached to the unit by inserting
the small end of the AC adapter into the DC IN CHARGE jack on the side of the
Battery Pack. Insert the other end (with the 2 blades) into a conveniently-located AC
outlet having 120V AC, 60Hz. The CHARGE indicator will light red as the battery is
charging and green when charging has completed. Disconnect the AC adapter
plugs when charging has finished.
NOTE:
• Fully charge the Battery Pack for 12 hours before using it for the first time. After
the initial charge, it should take approximately five hours to charge.
• A fully-charged Battery Pack can operate for about 2.5 hours.

USING THE CAR ADAPTER

Plug the small end of the car adapter into the DC IN jack and then plug the other
end into the car cigarette lighter socket.
8