Video Setup Menu - Memorex MVDP1101 User Manual

VIDEO SETUP MENU:

Press the SETUP button to enter the menu, select VIDEO SETUP using the Navigation
(√,®) buttons, then press the PLAY/ENTER button to select it.
option as described on page 19.
General General Audio
- - Video Setup Page - -
Component
COMPONENT
TV Mode
1
Sharpness
Brightness
Contrast
General General Audio
- - Video Setup Page - -
Component
Component
TV Mode
Sharpness
Brightness
Contrast
Component
TV: Select to see the image on the built-in screen. (You
can connect to an external TV to see the image using the
Video cable.)
YUV: Select for Component (Y/P
Output. (You will need to connect to an external TV to see
the image using the Component cable.)
General General Audio
NOTE: When you select YUV, the built-in screen will turn
- - Video Setup Page - -
off automatically and you can see the image on the
Component
TV Mode
external TV using the Component cable. To see the
Sharpness
image on the built-in screen again, turn off the unit and
Brightness
Contrast
then turn on again, the Component Output will reset to
General Audio
General
TV.
- - Video Setup Page - -
TV MODE
Component
The TV Mode setting is for Component Output only. Once Sharpness
TV Mode
you have set Component Out to YUV, you can select the
Sharpness
Brightness
TV Mode setting:
Contrast
P-Scan: Select for Progressive Scan Component Video
Output.
Interlace: If you connect a TV (using the Component
Sharpness
Cable) that is not compatible with a progressive scan
signal, select Interlace for the Component Video Output.
BRIGHTNESS
1
General General Audio
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
General General Audio
- - Video Setup Page - -
Component
Brightness
Press the PLAY/ENTER button to select
TV Mode
Sharpness
BRIGHTNESS. Use the Navigation (√,®) buttons
Brightness
to adjust (sharpen or soften) the picture, then press
Contrast
the PLAY/ENTER button again.
Brightness
SETUP MENU (CONTINUED)
Dolby Video Preference
LCD
Yuv
Dolby Video Preference
TV
Yuv
/P or Y/C
B R
Dolby Video Preference
High
Medium
Low
Dolby Video Preference
High
Medium
Low
Dolby Video Preference
Dolby Video Preference
Component
General General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
SHARPNESS
Contrast
1
Sharpness
General General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Adjust for the desired sharpness (HIGH,
Sharpness
MEDIUM, LOW).
/C )
B R
General General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Brightness
General General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Brightness
CONTRAST
1
General
General
- - Video Setup Page - -
Component
TV Mode
Sharpness
Brightness
Contrast
Contrast
Press the PLAY/ENTER button to select
General
General
- - Video Setup Page - -
CONTRAST. Use the Navigation (√,®) buttons to
Component
adjust (increase or decrease) the contrast, then
TV Mode
press the PLAY/ENTER button again.
Sharpness
Brightness
Contrast
23
Contrast
Audio Dolby Video
Select/change the Setup
High
Medium
Low
Audio Dolby Video
High
Medium
Low
Audio Dolby Video
Audio Dolby Video
Audio Dolby Video
Audio Dolby Video
Preference
Preference
Preference
Preference
Preference
Preference