Table of Contents
Advertisement
When "
corresponding function cannot be performed either on the disc inserted, or
MUTE BUTTON
1
Press the MUTE button once to mute the
sound; "MUTE" will appear on the screen.
Press the MUTE button again to restore the
sound; "MUTE OFF" will appear temporarily
on the screen.
HEADPHONE JACK(S)
1
For private listening, plug headphones into
one or both of the Headphone jacks. The
speakers will be disconnected when
headphone(s) are connected.
LCD MODE BUTTON
1
BASIC OPERATION
IMPORTANT:
" appears while pressing a button, this means that the
in the selected mode.
1
1
2
P/N BUTTON
1
Press the P/N button to switch back and
forth between NTSC and PAL. In the USA,
the standard is NTSC.
SCREEN MODE BUTTON
1
Press to cycle between standard 4:3 size
(TV) and full screen (will fill the LCD
screen).
NOTE: The Screen Mode button is just for
adjusting the built-in screen's display only,
not for the Video Output.
Press the LCD MODE button 1 to access the
On-Screen picture display menu. Use the
Navigation (√,®,π,†) buttons 2 to adjust the
screen display's Brightness, Contrast, Saturation
and/or Hue. When finished, press the LCD
MODE button 1 to exit the On-screen picture
display menu.
27
1
Advertisement
Table of Contents
