Table of Contents
Advertisement
1.Select a cooking function for cooking.
2.Press 0 until the 0 symbol appears on
the screen to in
9§
giqLJ§r 1§ t§rripE>
[l[l:[l[I
0
A Once you have set the function and
temperature V ture, you can adjust the
cooking time for
30 minutes by directly pressing
the (±) button for quick setting of
the cooking time and modifying
the time using the C±>/0 buttons.
3.Adjust the cooking time using the
C±>/0 buttons.
A The cooking time increases V by
one minute in the
First 15 minutes, after 15
minutes it increases by 5
minutes.
4.Put your food in the oven and adjust
the temperature using the
temperature knob.
» Your tower starts immediately at the
selected function and temperature. The
countdown of the set cooking time
begins and appears on the display.
Cooking time countdown and set
temperature value appear sequentially
with 3-line animations next to it. When
the
24/EN
VS::LliE>E>()rl:
internal temperature of the lathe
reaches the set temperature, the wire
symbol disappears when the timer
beeps. The 3-line animation on the
screen stops and the C symbol appears
continuously next to the temperature
value.
5.After three times the set cooking time has
elapsed, "End" appears on the display, the 0
symbol flashes and the acoustic signal sounds.
6.The warning sounds for two minutes.
Press any key to stop the warning. The
warning stops and the time of day is
displayed on the screen.
To set the end of cooking timeata later
hour; (This varies by device model. It
may not be available for your device.)
By selecting the temperature and cooking
function specific to your meal, you can set
the cooking time and the end of cooking
time to a later time, allowing the tower to
start and stop cooking automatically.
1.Select a cooking function for cooking.
2.Press 0 until the 0 symbol appears on
the display to indicate the cooking
time.
Advertisement
Table of Contents
