Table of Contents
Advertisement
*1
When the Bluetooth feature for handset is turned off, these menus are not
displayed.
*2
After the Bluetooth headphone is paired, the headphone name is displayed.
*3
For Headphone 1.
*4
For Headphone 2.
*5
For Headphone 3.
*6
For Headphone 4.
n Scrolling through the display menu:
MMENUN a MbN: "Bluetooth"
from the next sub-menus. a MSELECTN
*1
If the handset is registered to a base unit that supports the link to cell feature,
"Bluetooth (Handset)" is displayed.
Error messages
Display message
Error!!
Failed.
Check power at headphone.
For assistance, please visit http://shop.panasonic.com/support
KX-TGDA99(en)_0713_ver310.pdf 23
Feature differences
*1
a MSELECTN a MbN: Select the desired item
Cause/solution
R Although the unit tried to pair with the
headphone, the pairing has been failed.
– Make sure that the headphone is not
connected to other Bluetooth devices.
– The headphone is turned off or the
battery is low. Turn it on or fully
charge the headphone.
– The Bluetooth headphone is out of
range. Move closer and try again.
– The Bluetooth headphone is in the
cradle. Lift the headphone.
– The same headphone is already
paired.
R Although the unit tried to connect to the
headphone, the connection has failed.
– Make sure that the headphone is not
connected to other Bluetooth devices.
– The headphone is turned off or the
battery is low. Turn it on or fully
charge the headphone.
– The Bluetooth headphone is out of
range. Move closer and try again.
– The Bluetooth headphone is in the
cradle. Lift the headphone.
23
7/13/2022 11:58:07 AM
Advertisement
Table of Contents
