Sign in today to find solutions:

Don't have an account? Sign up

 
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phone: KX-TG1061
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit's operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and
save it for future reference.
For assistance, visit our website:
http://www.panasonic.com/help
for customers in the U.S.A. or
Puerto Rico.
Installation Manual
Additional Digital Cordless Handset
Model No.
PNQX1801YA
KX-TGA106
DC1208SY1019

Summary of Contents

  • Page 1

    Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: KX-TG1061 You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset.

  • Page 2

    Setting up Connections Note: L Use only the supplied Panasonic AC adaptor PQLV219. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) For assistance, please visit http://www.panasonic.com/help...

  • Page 3

    Battery installation/Battery charge Important: L Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 2. L Wipe the battery ends (S, T) with a dry cloth. L Avoid touching the battery ends (S, T) or the unit contacts.

  • Page 4

    L If an error tone sounds, or if w is still flashing, register the handset according to the base unit’s operating instructions. Display language {MENU} i {#}{1}{1}{0} {V}/{^}: Select the desired setting. Press the middle soft key to save. i {OFF} For assistance, please visit http://www.panasonic.com/help...

  • Page 5

    Drive the screws (not supplied) into the wall. Mount the charger (A), then slide it down (B) and to the right (C) until it is secure. 25.4 mm (1 inch) (120 V AC, 60 Hz) For assistance, please visit http://www.panasonic.com/help N To remove Screws...

  • Page 6

    L Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262).

  • Page 7

    Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone For assistance, please visit http://www.panasonic.com/help A nickel metal hydride battery that is recyclable powers the product you have purchased.

  • Page 8

    FCC RF Exposure Warning: L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L This handset may not be collocated or operated in conjunction with any other antenna or transmitter. For assistance, please visit http://www.panasonic.com/help...

  • Page 9

    à la législation locale. LEste producto está diseñado para usarse en los Estados Unidos de América. La venta o el empleo de este producto en ciertos países puede constituir violación de la legislación local. For assistance, please visit http://www.panasonic.com/help...

  • Page 10

    This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © Panasonic Communications Co., Ltd. 2009...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: