Using Your Mask - ResMed AirFit F20 User Manual

GENERAL WARNINGS

The technical specifications of the mask are provided
for your clinician to check that they are compatible
with the CPAP or bilevel device. If used outside
specification or if used with incompatible devices, the
seal and comfort of the mask may not be effective,
optimum therapy may not be achieved, and leak, or
variation in the rate of leak, may affect the CPAP or
bilevel device function.

Discontinue using this mask if you have ANY adverse
reaction to the use of the mask, and consult your
physician or sleep therapist.

Using a mask may cause tooth, gum or jaw soreness
or aggravate an existing dental condition. If symptoms
occur, consult your physician or dentist.

The F20 line of full face CPAP masks are not intended
to be used simultaneously with nebulizer medications
that are in the air path of the mask/tube.

As with all masks, some rebreathing may occur at low
CPAP pressures.

Refer to your CPAP or bilevel device manual for details
on settings and operational information.

Remove all packaging before using the mask.
Note: For any serious incidents that occur in relation to this
device, these should be reported to ResMed and the
competent authority in your country.

Using your mask


When using your mask with ResMed CPAP or bilevel
devices that have mask setting options, refer to the
Technical specifications section in this user guide for the
correct setting.

Follow the instructions provided by your physician or sleep
therapist. If you experience any problems (e.g. fitting,
adjustment, leakage, noise, etc.), contact your physician or
sleep therapist.

Adjustment tips (AirFit F20):

With air pressure applied, pull the mask away from your
face to allow the cushion to inflate and reposition onto
your face.

To resolve any leaks at the upper part of the mask,
adjust the upper headgear straps. For the lower part,
adjust the lower headgear straps.

Adjust only enough for a comfortable seal. Do not
overtighten as this may cause discomfort.

Adjustment tips (AirTouch F20):

To resolve any leaks at the upper part of the mask,
adjust the upper headgear straps. For the lower part,
adjust the lower headgear straps.

Adjust enough for a comfortable seal.

For a full list of compatible devices for this mask, see the
Mask/Device Compatibility List on
www.resmed.com/downloads/masks. If you do not have
internet access, please contact your ResMed
representative.

Use a standard conical connector if pressure readings
and/or supplemental oxygen are required.
3