Keypad Lock; Easy Pairing - Motorola TALKABOUT T47X Series Manual

Built-in LED Flashlight
1. Press the flashlight button to turn the light ON.
2. Press the flashlight button again to turn the light OFF.
Turn off the flashlight when not in use to
Note:
conserve battery power.

Keypad Lock

To avoid accidentally changing your radio
settings:
1. Press and hold Menu/Lock button until
2. When in lock mode, you can turn the radio ON and OFF,
adjust the volume, receive, transmit, send a call tone,
send Emergency Alert, turn the LED flashlight ON and
OFF, and monitor channels. All other functions are
locked.
3. To unlock the radio, press and hold
button until is no longer displayed.

Easy Pairing

The Easy Pairing feature allows a group of radio
users to program all their radios to the same
Channel and Interference Eliminator Code settings
quickly and simultaneously. Any one radio within the
group can be designated as the "Leader's radio"
and have it's Channel and Interference Eliminator
Code settings transmitted to and copied by all the
other radios in the group (Members' radios).
1. Pick any one of the radios as the "Leader's radio". On this
radio, program the Channel and Interference Eliminator
Code to the desired settings.(See "Selecting the
Channel" and "Selecting the Interference Eliminator
Code" sections in this user manual).
2. To copy the channel and Interference Eliminator Code
combination to all the other "Members' radios", press and
hold the
beep. Release the button after the beep, and wait for the
transmission from the Leader's radio.
Note:
displays. • The
radio is in Easy Pairing mode waiting to receive the
Channel and Interference Eliminator Code settings from
the Leader's radio. All Members' radios remains in this
mode for 3 minutes.
• A group with many radios should have all users take this
step at the same time, so all radios can be programmed
in one go.
3. On the Leader's radio, press and hold down the
Menu/Lock
until you hear a double beep.
Note:
• At the double beep, this radio's Channel and Interference
Eliminator Code settings is transmitted, which is received
and copied by all the other (Members') radios.
• The Leader's radio must make this transmission when all
the Members' radios are still in the Easy Pairing mode,
otherwise the transmission is not picked up.
• On the Leader's radio, user must remember NOT to
release the button on the first (single) beep, otherwise
this radio becomes another Member's radio. If that
happens, you can press PTT to escape, and retry step 3.
button on the Members' radios until you hear a
icon blinks on the display. This confirms that the
button
19