Table of Contents
Advertisement
MKS8002.OM.QXD
8/5/03
8:30 AM
REPEAT PLAYBACK
1
3
To repeat a single track, while in
the Stop mode, press the
REPEAT button ❶ once; the
REPEAT indicator will blink.
Press the Skip/Search (
) ❸ button to select the
(
specific track that you wish to
repeat. The specific track you
selected will start to playback
automatically and it will be
repeated continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 30 track programmable memory that allows you to program up to 30 tracks
on any disc for playback in any desired order. You may program 30 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
Rotate the POWER/VOCAL
control to the VOCAL OFF or
VOCAL ON position to turn the
unit on; the POWER indicator will
light.
PROGRAMMED PLAYBACK CONTINUED ON THE NEXT PAGE
Page 12
OPERATION (CONTINUED)
2
1
2
To repeat all of the tracks on a
disc continuously, while in the
stop mode, press the REPEAT
button ❶ twice; the REPEAT
) ❷ or
indicator will light solid. Press the
Play/Pause (
repeat all tracks.
2
Press the CD Door OPEN/
CLOSE area to open the CD
Compartment door. Place a CD
on the center spindle, with the
printed label side facing up. Close
the CD Compartment door.
12
3
2
1
To cancel Repeat Playback,
press the REPEAT button ❶ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the Stop
(■) button ❷.
) button ❷ to
3
Press the PROGRAM button; "01"
will appear in the display and the
PROGRAM indicator will blink.
1
Advertisement
Table of Contents
