Repeat Playback; Programmed Playback - Memorex MKS2115 User Manual

REPEAT PLAYBACK

1
4
2
3
To repeat a single track, press the
REPEAT button ‚ once; the
REPEAT indicator will blink.
Press the SKIP ( ) ƒ or (
„ button to select the specific
track that you wish to repeat.
When the desired track number
appears in the display, press the
PLAY/PAUSE (® ) button … to
begin playback. The specific track
you selected will be repeated
continuously.

PROGRAMMED PLAYBACK

The CD player in this unit has a 32 track programmable memory that allows you to program up to 32 tracks
on any disc for playback in any desired order. You may program 32 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
Press the POWER button to the
ON (in) position to turn the unit
on.
PROGRAMMED PLAYBACK CONTINUED ON THE NEXT PAGE
1
OPERATION (CONTINUED)
2
1
To repeat all of the tracks on a
disc continuously, while in the
Stop mode, press the REPEAT
button ‚ twice; the REPEAT
)
indicator will light solid. Press the
Play/Pause (® ) button ƒ to
repeat all tracks.
2
Lift the CD OPEN tab to open the
CD compartment door. Place a
CD on the center spindle, with the
printed label side facing up. Close
the CD compartment door.
1
11
3
2
To cancel Repeat Playback,
press the REPEAT button ‚ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the Stop
(I) button ƒ.
3
Press the PROGRAM button; "01"
will appear in the display and the
PROGRAM indicator will blink.
1
2
1