Repeat Playback; Programmed Playback; Continued On The Next Page - Memorex MKS5626 User Manual

REPEAT PLAYBACK

1
3
1
To repeat a single track, while in
the Stop mode, press the
REPEAT button ‚ once; the
REPEAT indicator will blink.
Press the SKIP/SEARCH o 2 or
n 3 button to select the specific
track that you wish to repeat.
When the desired track number
blinks in the display, within five
seconds, press the PLAY/PAUSE
(®p) button … to begin playback.
The specific track you selected
will be repeated continuously.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
2
Press the POWER button ‚ to
turn the unit on. Slide the
FUNCTION switch ƒ to the CDG
position.
OPERATION (CONTINUED)
2
1
To repeat all of the tracks on a
disc continuously, while in the
Stop mode, press the REPEAT
button ‚ twice; the REPEAT
indicator will light solid. Press the
PLAY/PAUSE ( p) button ƒ to
repeat all tracks.
2
1
Lift up the LIFT TO OPEN area to
open the CD compartment door.
Place a CD in the compartment,
with the printed label side facing
up and close
compartment door.
1

CONTINUED ON THE NEXT PAGE

3
To cancel Repeat Playback,
press the REPEAT button ‚ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the STOP
(I) button ƒ.
3
3
Press the PROGRAM button; "0"
will blink in the display and the
PROGRAM indicator will blink.
the CD
11
2
1
1