Repeat Playback; Programmed Playback; Continued On The Next Page - Memorex MKS8590 User Manual

REPEAT PLAYBACK

1
1 1
4
To repeat a single track, while in
the Stop mode, press the CD+G
REPEAT button ‚ once; the
REPEAT indicator will blink.
Press the CD+G SKIP/SEARCH
o 2 or n 3 button to select the
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
CD+G PLAY/PAUSE (®p) button
… to begin playback. The specific
track you selected will be
repeated continuously.

PROGRAMMED PLAYBACK

The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks
on any disc for playback in any desired order. You may program 19 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
Press the POWER button to turn
the unit on.
OPERATION (CONTINUED)
2
1 1
2
To repeat all of the tracks on a
disc continuously, while in the
Stop mode, press the CD+G
REPEAT button ‚ twice; the
REPEAT indicator will light solid.
Press the CD+G PLAY/PAUSE
(®p) button ƒ to repeat all
tracks.
2
Press the OPEN/CLOSE area on
the top of the unit to open the CD
compartment. Place a CD in the
compartment, with the printed
label side facing up and close the
CD compartment door.

CONTINUED ON THE NEXT PAGE

3
To cancel Repeat Playback,
press the CD+G REPEAT button
‚ until the REPEAT indicator
goes out. You can also cancel
Repeat Playback by pressing the
CD+G STOP (I) button ƒ.
3
Press the CD+G PROG. button;
"0" will blink in the display and the
PROG. indicator will blink.
10
1 1 2