General Information; Model Identification; Component Locations - Dometic CCF-T Installation Manual

WARNING! Avoid touching the compressor or front fan blades during installation. Failure to obey this caution could result in minor or
moderate injury.

Park the vehicle in a well-ventilated area during the installation process. Ensure the vehicle is in Park with the emergency brake engaged at
all times during the installation process.

Follow all vehicle manufacturer safety procedures.
NOTICE! Failure to obey the following notices could result in property damage.
NOTICE Failure to obey the following notices could result in property damage:

Do not use a power strip or two-way splitter.

Do not use power cord adapters other than those provided by the manufacturer

GENERAL INFORMATION

This section provides information on the included parts, installation tools and materials, component locations, and the refrigerator.
The images used in this document are for reference purposes only. Components and component locations may vary according to specific product models.
Measurements may vary ±0.38 in. (10 mm).
TOOLS REQUIRED FOR WIRING ROUTING
1 Screwdriver
2 Wire Cutter
3 Plier
4 Heat Gun
5 Utility Knife
6 Crimping Tool

MODEL IDENTIFICATION

This section provides the location of the refrigerator model identification label.
Have this information readily available if you have to call the Dometic Customer Support Center.

COMPONENT LOCATIONS

This section identifies the refrigerator's main components.
Dometic CCF-T Ford Expedition 2022 Installation Manual/ 2022-03-03/ Page 2 of 15