ViewSonic N2230w-2M Service Manual page 14

Remote Control
ViewSonic Corporation
Button Description
2 ENTER
Press to confirm the selection in the OSD menu, or
to enter the OSD menu you select.
Press ENTER after you input channel numbers
will change channels immediately.
Press to direct to TV source when in any other
3 TV
source.
Press to adjust the volume.
4 - VOL +
5 GUIDE Press to display the Electronic Program Guide
(EPG). It contains the program information for the
channel you're watching.
＊ The picture here shows an example of the GUIDE
screen in a DTV source.
6 LIST Press this button to show a small window showing
program list, you can scroll through the list to select
the channel you want directly without using the ▲
/▼ button.
Press 0~9 and "-" to select a channel. After you
7 0~9, -
number input the channel numbers, press ENTER button
buttons to direct to the channel immediately, or wait for 3
seconds to change automatically.
Press this button to turn the power on from standby
8 POWER
mode. Press it again to return to the standby mode.
9 ▲▼◄►
Press these buttons to navigate the OSD menus. ▲/▼
buttons
is for function select, and ◄/► is for function
adjustment.
11
Confidential - Do Not Copy
N2230w-2M