ViewSonic N2230w-2M Service Manual page 12

Rear View of the Product
Item
1 Power (AC input)
HDMI Input Terminal
2
3 VGA signal input
4 YPbPr signal input
Composite Video input Connect this jack to the composite video output connectors on your
5
6 S-Video input
AV/ S-Video/ YPbPr/ DVI
7
Audio input (left/ right)
8 PC Audio input
ViewSonic Corporation
Description
Plug-in the supplied AC Power cord and connect to the AC input
power source.
Connect this port to the HDMI/HDMI-DVI jack of the compatible
equipment.
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the LCD
TV.
Connect this jack to the YPbPr output of A/V device.
A/V equipment.
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
Connect the Audio in cable for AV/ S-Video/ YPbPr/ HDMI-DVI from
this jack to the corresponding connectors on your A/V device.
Connect the RGB Audio Out on your computer to the RGB Audio
on the rear of the LCD TV.
9
Confidential - Do Not Copy
N2230w-2M