Meade Customer Service - Meade LightBridge 16 Instruction Manual

16
b. When absolutely necessary, dust on the mirror should be blown off with an ear
syringe (available at any pharmacy). DO NOT use a commercial photographic
lens cleaner.
c. Organic materials (e.g., fingerprints) on the front lens may be removed with a
solution of 3 parts distilled water to 1 part isopropyl alcohol. You may also add 1
drop of biodegradable dishwashing soap per pint of solution. Use soft, white facial
tissues and make short, gentle strokes. Change tissues often.
Caution: Do not use scented or lotioned tissues or damage could result
to the optics.
d. If the telescope is used outdoors on a humid night, water condensation on the
telescope surfaces will probably result. While such condensation does not
normally cause any damage to the telescope, it is recommended that the entire
telescope be wiped down with a dry cloth before the telescope is packed away.
Do not, however, wipe any of the optical surfaces. Rather, simply allow the
telescope to sit for some time in the warm indoor air, so that the wet optical
surfaces can dry unattended.
e. If your is not to be used for an extended period, perhaps for one month
telescope
or more, it is advisable to remove the batteries from the battery pack. Batteries
left in the telescope for prolonged periods may leak, causing damage.
g. Do not leave your telescope inside a sealed car on a warm summer day; exces-
sive ambient temperatures can damage the telescope's internal lubrication

MEADE CUSTOMER SERVICE

If you have a question concerning your LightBridge Truss Tube Dobsonian, contact the
Meade Instruments Customer Service Department at (800) 626-3233. Customer
Service hours are 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday. In the
unlikely event that your LightBridge Dobsonian requires factory servicing or repairs,
write or call the Meade Customer Service Department first, before returning the
telescope to the factory, giving full particulars as to the nature of the problem, as well
as your name, address, and daytime telephone number. The great majority of
servicing issues can be resolved by telephone, avoiding return of the telescope to the
factory. If factory service is required, you will be assigned a Return Goods
Authorization (RGA) number prior to return.