Connecting To The Zyxel Device's Wifi Network Using Wps - ZyXEL Communications AX Series User Manual

Go to the Wireless > Others screen. Set 802.11 Mode to 802.11b/g/n Mixed, and then click Apply.
2
You can now use the WPS feature to establish a WiFi connection between your notebook and the Zyxel
Device (see
through the Zyxel Device using WiFi.

4.3.2 Connecting to the Zyxel Device's WiFi Network Using WPS

This section shows you how to connect a WiFi device to the Zyxel Device's WiFi network using WPS. WPS
(Wi-Fi Protected Setup) is a security standard that allows devices to connect to a router securely without
you having to enter a password. There are two methods:
• Push Button Configuration (PBC) – Connect to the WiFi network by pressing a button. See
4.3.2.1 on page
• PIN Configuration – Connect to the WiFi network by entering a PIN (Personal Identification Number)
from a WiFi-enabled device in the Zyxel Device's Web Configurator. See
This is the more secure method, because one device can authenticate the other.
4.3.2.1 WPS Push Button Configuration (PBC)
This example shows how to connect to the Zyxel Device's WiFi network from a notebook computer
running Windows 10.
Make sure that your Zyxel Device is turned on, and your notebook is within range of the Zyxel Device's
1
WiFi signal.
Push and hold the WPS button located on the Zyxel Device until the WiFi or WPS LED starts blinking slowly.
2
Alternatively, log into the Zyxel Device's Web Configurator, and then go to the Network Setting >
Wireless > WPS screen. Enable WPS and Method 1 PBC, click Apply, and then click the WPS button.
Chapter 4 Tutorials
Section 4.3.2 on page 63). Now use the new security settings to connect to the Internet
63. This is the simplest method.
AX/DX/EX/PX Series User's Guide
63
Section
Section 4.3.2.2 on page 66.