Fig. 8-20: Switch Output; Fig. 8-21: Output Characteristics; Fig. 8-22: De-Rating Output - Bosch Rextroth Indramat RECO R-IB IL CNT Applications Manual

8-8
Programming, Technical Data and Ordering Information
Note:
- Inductive overload
Behavior during a short-circuit
Limitation of inductive breaking power
Over-current switch-off
Return voltage strength against short pulses
Maximal return current
Strength against continuous overvoltage
Output characteristics when switched on (usually)
Output current (A)
Limitation of simultaneity, de-rating
De-rating
An auto-restart can occur with a long delay after removing the overload due to the
characteristic of a bulb. The delay time can be reduced by switching the output for a
short time.

Fig. 8-20: Switch output

0
0,1
0,2
0,3
0,4
0,5

Fig. 8-21: Output characteristics

Fig. 8-22: De-rating output

Output can be destroyed
Auto-restart after removing the short-circuit
At approx. -18 V
Minimal at 0.7 A
Protected against return voltage
0.5 A
No
Output voltage difference (V)
No simultaneity limitation
No de-rating
DOK-CONTRL-R-IL*CNT***-AW02-EN-P
Counter Terminal
0
0.25
0.35
0.45
0.55
0.65