Connecting The Display; Connecting A Dvd Player - Maxent MX-50X1 User Manual

Connecting a DVD Player

Using Component Video Input
1.Connect the green-colored (labeled as "Y") jack from
the DVD to the green-colored "Y1" jack of the displa
.
2.Connect the red-colored (labeled as "P
from the DVD to the red-colored "P
the display.
3.Connect the blue-colored (labeled as "P
jack from the DVD to the blue-colored "P
jack of the display.
4.Connect the red (R) and white (L) audio jacks from
the DVD to the R and L audio-in jacks located next
to the "P 1/C 1" connector.
R R
Using S-Video Input
1.Connect the S-Video (4-pin DIN) connector from the
DVD to the "S-VIDEO" input on the back of displa
.
2.Connect the red (R) and white (L) audio jacks from
the DVD to the R and L audio-in jacks located next
to the S-VIDEO connector.
Using Composite (AV) Video Input
1.Connect the "yellow" (video) connector from the
DVD to the yellow "VIDEO 1" input on the back of
display.
2.Connect the red (R) and white (L) audio jacks from
the DVD to the R and L audio-in jacks located next
to the yellow "VIDEO 1" connector.

CONNECTING THE DISPLAY

" or "C ") jack
R R
1/C 1" jack of
R R
Note:
There are two sets of
" or "C ")
B B
component inputs
1/C 1"
B B
provided. You can use
either set of compo-
nent inputs to connect
your DVD.
9