Attachment To Type 3510 Micro-Flow Valve - Samson 4747 Mounting And Operating Instructions

5.5 Attachment to Type 3510
Micro-flow Valve
Î See Fig. 5.
Î Required mounting parts and accesso-
ries:
section 3.3 on page 15.
1. Adapt the mounting position as de-
scribed in section 5.2.
Î Select the S lever (6) from the accessories
and mount it onto the limit switch.
Î Screw the follower pin into the pin posi-
tion 17.
2. Fasten the limit switch on the bracket (3).
3. Place follower clamp (1) on the valve
stem connector, align at a right angle
and screw tight.
4. Position the bracket (3) with the limit
switch on the valve yoke and screw tight,
making sure the follower pin (2) slides in-
to the groove of the follower clamp (1).
EB 4747 EN
Mounting
27