Table of Contents
Advertisement
Configure a fireplace with the app
(iPhone)
1.
Put the dongle in configuration mode keeping the button pressed
until green and red lights turn on.
2.
Connect the mobile device to the local WiFi network.
3.
Press the "Configure new fireplace" button, located in the
hamburger menu of the app. Wait for the fireplace to be detected.
4. The application will ask you to connect to the 'Proflame_AP' WiFi
network to continue the configuration by pressing 'Join'.
5. Wait for the fireplace to be detected.
6. If the dongle fails to connect automatically to the Dongle's
WiFi network, the following message will appear:
7. This message is due either to the presence of outdated software
inside the dongle or to the fact that the Dongle is not in configuration.
If the Dongle is in configuration mode, the application waits the
smartphone to connect to the "PROFLAME_AP_XXXXXXXXXXXX"
WiFi network (Password:password),The user must connect
manually to this network by exiting from the Proflame Connect
app and entering into the WiFi manager of the device. Her the
user must select the WiFi network of the fireplace to configure.
After this, the user has to go back to the Proflame Connect app.
XG0681 - 090222
8. When the fireplace is detected, press the Next button.
9. Enter your WiFi password and press Next.
10. Insert a fireplace name and press Next.
11. If you want to use your fireplace with Virtual Assistants, please
insert below the 8-chars Pairing Key that you received by email.
To get the key to use voice commands you need to register your
device on the registration web page, if you don't want to use voice
commands, leave the field blank and press next.
12. The configuration procedure is completed.
General
5
Advertisement
Table of Contents
