Table of Contents
Advertisement
Configure a fireplace with the app
(Android)
1.
Put the dongle in configuration mode keeping the button pressed
until green and red lights turn on.
2.
Connect the mobile device to the local WiFi network.
3.
Press the "Configure new fireplace" button, located in the
hamburger menu of the app. Wait for the fireplace to be detected.
4.
When the fireplace is detected, press the Next button.
5.
Enter your WiFi password and press Next.
6.
Insert a fireplace name and press Next.
4
7.
If you want to use your fireplace with Virtual Assistants, please
insert below the 8-character pairing key that you received via
email. To get the key to use voice commands you need to register
your device on the registration web page, if you don't want to
use voice commands, leave the field blank and press next.
8. The configuration procedure is completed.
General
XG0681 - 090222
Advertisement
Table of Contents
