Maxent MX-27X2 Owner's Manual page 41

In certain special cases, users may desire to manually adjust V-Size. To do so, please use the following
procedures:
Pressing the key 5 or more times and pressing the
V-Size will be enabled in OSD now and this function will be locked again when users turn off monitor.
Due to various PC video cards and set-top boxes with differing specifications, it is likely that the initial picture
may not fit exactly to the size of the monitor. Please use the following procedures to adjust the picture size and
position.
Press the on the front panel or remote
control. Use
option from the menu and press
confirm selection.
Various settings are available from the PICTURE
menu. Use
H-Size, or H-Position from the menu and press
key to confirm selection.
A small display window appears upon selecting
the option to change. Use
setting so that your video picture is best fit
within the display area of the monitor. Press
key to confirm setting and return to
previous menu.
Repeat procedure for V-Size, V-Position, H-Size,
and H-Position settings until video picture is
fully displayed within the monitor's display area.
to select the PICTURE
key to
to select V-Size, V-Position,
to change the
Picture Controls
key 5 or more times, then pressing the key.
41