Maxent MX-27X2 Owner's Manual page 35

BRIGHTNESS
Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and
shadow scenes. Increasing brightness will make dark areas more visible.
COLOR
Use color to adjust the color saturation of the video picture. Increasing color will make the color
more intense. Reducing color setting will make the color less intense.
TINT
Use tint to adjust the color of fleshtones. Increase in the right direction will shift the picture with
more green in appearance. Decreasing setting in left direction will shift the picture with more red in
appearance.
SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the
setting will enhance the edges of objects in the video picture. Decreasing the setting will reduce
enhancement.
COLOR TEMP
Select the color temperature for white balance. There are four settings to choose from: (1) 6500D -
sets the white balance to 6500D; (2) LOW - sets to 5400K; (3) MID - sets to 9300K; (4) HIGH - sets
to 13800K
FORMAT
Use to change various screen width modes. There are six modes to choose from: (1) 16:9, (2) 4:3,
(3) Panorama, (4) Zoom 1, (5) Zoom 2, (6) Zoom 3.
V-SIZE
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical
direction. Decrease to reduce the picture size in the vertical direction.
V-POSITION
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the
picture down.
H-SIZE
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal
direction. Decrease to reduce the picture size in the horizontal direction.
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease
to shift the picture to the left.
CLOCK PHASE
Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under
RGB mode.
Notes:
H-Position, H-Size and V-Position adjustments are only available in RGB and Component input modes
higher than 480i.
When using Component 1 and Component 2 inputs with 480i signals, H-Size, H-Position, V-Size, V-Position
settings are not available.
Picture Controls
35