Picture-In-Picture / Side-By-Side Picture - Maxent MX-27X2 Owner's Manual

Picture Controls

Picture-in-Picture / Side-by-Side Picture

Turning On PIP/Side-by-Side Picture (POP)
PIP and POP modes allow users to view two video input sources simultaneously.
Press the key once on the remote control
to engage in Picture-in-Picture mode. Pressing
the key repeatedly will cycle thru the following
modes:
When engaged in PIP mode, a small window is
displayed in one of the four corners. The OSD
on the upper right corner will denote the input
selected for main picture (large screen) and the
sub-picture (small screen) displayed.
Note:
Once PIP is turned off, the next time you
return on PIP mode, the position of the sub-
window will start at default position.
If switched to POP mode, the screen will be
split in half. The screen on the left side is the
main picture and the screen on the right is the
sub-picture. The OSD on the upper right corner
will denote the input signal source for both the
main and sub-pictures.
There are two Side-by-Side picture modes
available in addition to the standard POP mode.
POP (4:3) mode will display both main and sub-
picture in a 4:3 aspect ratio within the POP
windows. POP (16:9) mode will display both
main and sub-picture in 16:9 aspect ratio within
the POP windows.
36
PIP Mode
M: TV
S: AV
POP Mode
M: TV
S: AV
POP 4:3 Mode
Main
Sub
Picture
Picture
POP 16:9 Mode
Main
Sub
Picture Picture
PIP Key
Input Source for
Main Picture
Input Source for
Sub Picture
Sub
Picture
Main
Picture
Input Source for
Main Picture
Input Source for
Sub Picture
Sub
Picture
Main
Picture