Product Specifications; Battery And Charger; Replacement Parts - Ryobi R36XLTR10 Manual

PRODUCT SPECIFICATIONS

Cordless line trimmer
Model
Voltage
No-load speed (high)
No-load speed (low)
Cutting capacity
Cutting line diameter
Weight
Without battery pack
With 6 Ah battery pack
Noise emission values determined according to IEC 60335-2-91
A-weighted sound pressure level
Uncertainty
A-weighted sound power level
Uncertainty
Vibration total values determined according to IEC 60335-2-91
Vibration emission value
Front handle
Rear handle
Uncertainty
L + K
WA WA

BATTERY AND CHARGER

Model R36XLTR26
Battery pack R36BTY6
Charger R36CHA4A0
BPL3626D2, BPL3650D2, BPL3640D2,
BPL3620D, BPL3660D, BPL3690D,
Compatible battery
BPL3612D, R36BTY2, R36BTY4,
packs
R36BTY5, R36BTY6, R36BTY8,

REPLACEMENT PARTS

Replacement head
Replacement bump knob
Replacement 2.4 mm trimming line
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
R36XLTR26 / R36XLTR10
another. They may be used for a preliminary assessment
of exposure.
36 V d.c.
The declared vibration and noise emission values represent
5500 +/- 10% min
the main applications of the tool. However, if the tool is used
5000 +/- 10% min
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
38 cm / 43 cm
may differ. These conditions may significantly increase the
exposure levels over the total working period.
2.4 mm
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned off
4.2 kg
or when it is running idle. These conditions may significantly
reduce the exposure level over the total working period.
6 kg
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
= 78.9 dB(A)
L
pA
case of vibration), and organising work patterns.
K = 3.0 dB
L = 92.4 dB(A)
WA
K = 3.0 dB
a = 3.9 m/s
2
h
a = 2.9 m/s
2
h
K = 1.5 m/s
2
96 dB (A)
R36XLTR10
–
–
R36BTY12
RAC1214
530455002
RLTS3
WARNING! The declared vibration total values and the