Safety not use a power tool while you are tired or under the GENERAL SAFETY WARNINGS influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. WARNING ■ Use personal protective equipment. Always wear Read all safety warnings and all instructions.
Safety ■ Keep cutting tools sharp and clean. Properly ■ If the power cable becomes damaged, you must maintained cutting tools with sharp cutting edges are return the tool to an approved service centre for less likely to bind and are easier to control. repair or replacement.
Safety ENVIRONMENTAL PROTECTION Recycle raw materials and waste electrical products instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling. SYMBOL Safety alert Please read the instructions carefully before starting the machine. Wear ear protection. Wear eye protection.
PRODUCT SPECIFICATIONS Rated power 500 W Rated voltage 230/240 V ~ 50 Hz Cutting capacity 18 mm Blade length 450 mm No-load speed 1,600 /min Brake time < 1 s Weight (without cord) 2.7 kg Vibration 3.22 m/s K = 1.5 m/s Measured sound pressure level : 86.4 dB(A), : 3.0 dB(A)
Page 14
Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand...