Stop Therapy - ResMed AirMini User Manual

Using the nasal or the pillows connector
1. Plug the power supply unit into the machine and power outlet.
Connect the gray end of the AirMini tubing firmly to the air outlet.
2. To add optional humidification: Open the connector by gently
twisting it. Hold the HumidX at the sides, colored side pointing
downwards and insert it. Gently push together the connector and
twist until it locks in place.
3. Fit the mask as instructed in the mask user guide. Attach the
connector to your mask.
4. Press the Start/Stop button or breathe normally if SmartStart™ is
enabled

Stop therapy

1. Remove your mask.
2. Press the Start/Stop button or wait until the machine stops if
SmartStop is activated.
English 7