Enable Neighbor Access Point Detection And Move Access Points To The Known Ap List - NETGEAR WAX638E User Manual

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
Note: If you enable Energy Efficiency Mode, the access point cannot detect neighbor
APs in the 5 GHz and 6 GHz radio bands. To use neighbor AP detection in the 5 GHz
and 6 GHz radio bands, first disable Energy Efficiency Mode. For more information, see
Manage the Energy Efficiency Mode on page 176.
Enable neighbor access point detection and move access
points to the Known AP List
The access point can detect neighbor access points (APs) and lets you classify them as
known APs. After you enable neighbor AP detection, the access point maintains a list
of access points it detects in the area. Initially all detected access points are displayed
in the Unknown AP List. You can manually move access points from the Unknown AP
List to the Known AP List.
By default neighbor access point detection is disabled.
To enable neighbor access point detection and move detected access points to
the Known AP List:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 43.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > Security > Neighbor AP.
The page that displays lets you select the radio band (2.4 GHz, 5 GHz, or 6 GHz).
5. Click the > button to the left of the radio band.
The Neighbor AP page displays for the selected radio band.
6. Select the Enable Neighbor AP check box.
Manage Access and Security 125 User Manual