About Your New Label Maker; Inserting The Batteries - Dymo LetraTag 200B Quick Start Manual

About Your New Label Maker

The DYMO LetraTag label maker uses
DYMO LT 12 mm label cassettes. LT label
cassettes are available in a variety of colors
and materials.
Download the full LetraTag 200B User
Guide from support.dymo.com.
Registering Your Label Maker
Visit www.dymo.com/register to register your label maker
online. During the registration process, you will need the
serial number, which is located on the bottom of the label
maker.

Inserting the Batteries

The label maker uses 4 high-
capacity AA alkaline batteries.
To insert the batteries
1 Lift to open the cover.
2 Insert the batteries following the
polarity markings (+ and –).
3 Close the cover.
Safety Precautions
Do not mix old and new

batteries.
Do not mix alkaline, standard (carbon-zinc), or

rechargeable (ni-cad, ni-mh, etc.) batteries.
Remove the batteries if the printer will not be used for a

long period of time.
1
EN
Download
User Guide