Speaker Settings; Audio Settings; Parental Settings - Coby DVD-283 Instruction Manual

Item
Screen Saver
Last Memory

Speaker Settings

Use the Navigation Keypad to highlight the desired speaker selection and press
Item
3D/EQ
Reverb

Audio Settings

Use the Navigation Keypad to highlight the desired audio selection and press
Item
Digital Output
Channel Output
HDMI Audio

Parental Settings

Use the Navigation Keypad to highlight the desired parental selection and press
Item
Password
Change Password
Page  Page 
SETUP
Description
The screensaver prevents burn-in damage to
television displays.
Set the Last Memory function on or off.
Description
Sets the audio equalizer option (Off, 3D, Rock,
Classic, Jazz, Pop).
Sets the audio reverb effects option (Normal,
Living Room, Hall, Arena, Cave, Concert Hall,
Bathroom, Church).
Description
Sets the digital audio output signal type (PCM,
RAW, OFF). For use with digital decoding
receivers (see your receiver's manual for more
information).
Sets the audio channel mix mode (LT/RT, Stereo).
Set the HDMI audio function on or off. Turn HDMI
Audio off to use HDMI video with an alternate
audio connection (e.g., Coaxial Digital Audio).
Description
You must input the four-digit password to access the Parental settings.
The initial password is 8888.
Enter the old password, the new password, and then the new password
again to verify and change the Parental Settings password. Restoring the
player's default settings will not reset the password. DO NOT FORGET
THE PASSWORD; this password cannot be reset.
Default Setting
On
On
to confirm.
Default Setting
Off
Off
to confirm.
Default Setting
RAW
Stereo
On
to confirm.
Default Setting
Coby Electronics Corporation Coby Electronics Corporation