Table of Contents
Advertisement
Enter Setup mode to adjust the various internal settings
of the player. Make sure the player has been completely
stopped before entering Setup mode.
1.
Press SETUP to enter Setup mode.
2.
Use the NAVIGATION keys to select a desired item.
3.
Press ENTER to confirm a selection.
4.
Press SETUP to exit Setup mode (or select EXIT
and press ENTER).
Language Settings
Use the NAVIGATION keys to highlight the desired language selection and press ENTER to confirm.
Item
OSD
Menu
Audio
Subtitle
Screen Saver
Defaults Reset
Display Settings
Use the NAVIGATION keys to highlight the desired display selection and press ENTER to confirm.
Item
Aspect Ratio
TV Type
Video Out
Page
Page
SETUP
Description
Sets the language of the player's on-screen
display.
Sets the default menu language of loaded DVDs.
Sets the default language audio track of loaded
DVDs.
Sets the default subtitle track of loaded DVDs.
The screensaver prevents burn-in damage to the
player's screen.
Resets all settings to their factory-default state.
Description
Sets the aspect ratio of the display. 4:3 is used
with standard television displays; 16:9 is used
with widescreen television displays.
Sets the player's Video Out signal type. Set this
to correspond with your TV's Video System type.
NTSC is the standard used in North America.
Sets your player's video output mode. Set this to
correspond with the type of connection used with
your TV.
S-Video+CVBS: S-Video or Composite Video
P-Scan: Component Video (Progressive Scan)
YUV: Component Video
Default Setting
English
English
English
English
On
Default Setting
4:3L-Box (Letterbox)
NTSC
S-Video+CVBS
Coby Electronics Corporation
Coby Electronics Corporation
Advertisement
Table of Contents
