Basic Playback
1.
Prepare the connections and power supply.
Press
to turn the player on.
2.
Select the video line.
Set your TV to display the video line connection that corresponds to your DVD player (e.g.,
AV1, AV2, HDMI, Component, S-Video, DVD, etc.) The DVD output will be displayed on the
TV screen when the proper line has been selected.
3.
Load a disc.
Press
to open the disc tray. Insert a disc with the label-side up. Press
close the disc tray.
•
If a single-sided disc is inserted upside-down, the player will display "NO DISC" or
"BAD DISC".
4.
Start playback.
Press
to start playback.
•
Some discs may start playing automatically or display a DVD menu specific to the
disc. If a menu appears, use the Navigation Keypad to select a desired feature or op-
tion and then press
Play/Pause/Stop
•
Press
to play the disc for the first time.
•
Press
during playback to pause. Press
•
Press
during playback to stop the disc ("Pre-Stop"). Press
the time-point at which the disc was stopped.
•
Press
when the disc is "Pre-Stopped" to stop playback completely. (When
pressed, the disc will start playing from the beginning.)
Previous/Next (Skip)
•
Press
to skip to the next track (DVD, CD, etc).
•
Press
to return to the previous track (DVD, CD, etc).
Forward/Reverse (Search)
•
Press
to fast forward through the current track. Each successive press of
change the rate of forward playback. Press
Normal
x2
•
Press
to reverse through the current track. Each successive press of
the rate of reverse playback. Press
Normal
x2
www.cobyusa.com
www.cobyusa.com
BASIC OPERATIONS
to confirm.
x4
x8
x16
x32
x4
x8
x16
x32
again to resume playback.
to resume normal playback.
to resume normal playback.
again to
to resume playback at
is
will
will change
Page 1
Page 1